Order Info
- Order will be shipped out from DE warehouse in 1-3 business days once being processed.
- Free Shipping over €55 (most EU countries)
- Free Shipping over €119 (Norway, Cyprus, Malta, Switzerland)
- Shipping rates vary by locations. See our Shipping Policy for details.
Tunable White COB LED Strip Light
This LED light strip offers adjustable white light with a color temperature range from warm white to cool white (2700K-6500K). You can automatically select the appropriate mode based on your own model design. It fulfills your various needs, providing you with more possibilities for your creations.
Illuminate Your Printing Journey
Experience enhanced visibility of the printing process with the internal illumination provided by this LED light strip. Watch as your models come to life layer by layer, with improved clarity and precision. Perfect for detailed observation and capturing stunning visuals, this lighting solution takes your printing experience to the next level.
| Product Specification | |
| Type of Strip | COB (chip on board) |
| IC type | 16703 |
| LED Model | 2835 |
| Led Quantity | 2160 LEDs (432 LEDs/M) |
| Length | 16.4ft/5m |
| Product Specification | |
|
Input Voltage Power |
DC24V 16.3W/m |
| LED Strip Width | 12 mm |
| Color | Dual temperature |
| Color Temperature | 2700K-6500K |
| FPCB Color | White |
| Product Specification | |
| Operating Temperature | -4℉~104℉（-20℃~+40℃ ） |
| Control Distance | 20-30M |
| Battery Type | CR2025 |
| Cutting Unit | 16.7 cm |
| Waterproof | IP 20 |
Parameter
Each pixel can be easily cut or soldered independently without damaging the rest pixels. The LED strip is constructed with a 50cm (1.6FT) Flexible Printed Circuit Board (FPCB), featuring a solder point at every 50cm interval. This design ensures convenient connectivity and easy customization along the strip.
Installation
Light Touch Panel Controller Instructions
Considerations
- Disconnect the power before installation.
- The product must be cut only along thr pre-defind cutting lines to aviod product damage.
- A electric soldering iron must be used to solder the wiring head after cutting the product.
- This product can accept proper bending.
- Do not use any voltage other than the voltage marked on the product to access the product.
- Avoid luminescent zone colloid contact with high temperature objects, so as not to burn the colloid and affect the linear effect.
- Do not bend or twist the lamp strip at a short distance to avoid damage to the rubber strip or damage to the electrical structure of the chip.