Order Info
- Free Shipping over €55 (most EU countries)
- Free Shipping over €119 (Norway, Cyprus, Malta, Switzerland)
- Shipping rates vary by locations. See our Shipping Policy for details.
Risorse sulla sicurezza e sul prodotto
Immagini di sicurezza
Contatti






Informazioni sul produttore
Persona responsabile nell'UE
Overview
The product contains all the non-3D printed parts for assembling an entirely functional SnapaTrack. To complete the work, you also need to download the model files and 3D print the remaining parts.
Creator Program: The Creator Program is a collaborative program between Bambu Lab and creators. Creators unleash their creativity to design 3D printing models, while Bambu Lab provides compatible hardware kits for those designs.
To download the model files, please visit the SnapaTrack on MakerWorld.

In the Box
Item | Qty |
Power Distribution Board - 4 Channels - IA005 |
1 |
N20 Dual Shaft Worm Gear Motor 130rpm - LA009 |
1 |
AAA Battery Spring Contact Plate with PH2.0 - IA008 |
1 |
OD 24x2.5mm O Rings - RB004 |
1 |
Self-Locking Button Switch with SH1.0 Connector - IA006 |
1 |
4 White 3030-LED Board with SH1.0 Connector 5V - KB001 |
1 |
D2 Stainless Steel Dowel Pin 2x25mm - DA002 |
1 |
M2x8 FHCS Machine Screw - AA179 |
1 |
Considerations
-
After a while, your vehicle may have difficulty climbing the bridge. First wash the O-rings in warm soapy water. The O-rings are dust magnets and will need to be cleaned every now and again.
-
Turning the lights off will help the batteries last longer.
-
If the wheels spin in the wrong direction, simply rotate the motor.
-
Each kit contains all the parts you need to complete one car model.