Bambu Lab


Carbon Fiber Reinforced PETG

€31,99 EUR

VAT excluded. Actual tax rate varies by country

✔ Dry out before use
✔ AMS compatible
Color: Black
Shipped from DE warehouse
Free Shipping on orders
● over €45 (most EU countries)
● over €99 (Norway, Cyprus, Malta, Switzerland)
● Free shipping excluding printers and AMS
14-Day Refund Service, 30-Day Replacement Service
You may cancel order within two hours of submitting your order. For complete details, read our ORDER CANCELLATION


Bambu PETG-CF is a composite material consisting of PETG and carbon fiber. The new formula greatly improved printing quality by reducing nozzle clogging and clumping compared to traditional PETG. With the addition of carbon fiber, Bambu PETG-CF offers improved strength while maintaining good toughness and a shiny look. It is an ideal material for drone parts, racing models, and various functional parts that require both high performance, especially impact strength, and a sleek appearance.


Less clumping and stringing

Bambu PETG-CF is improved with a modified formula that specifically addresses the issue of clumping and sticking to nozzle during PETG printing.



Premium print surface

Carbon fiber brings advanced texture to the print surface, while retaining the shine of PETG itself.

petg-cf petg-cf

Carbon Fiber Texture

Carbon fiber brings soft reflection, minimal layer lines and a unique delicate texture.

图片加载失败文案 图片加载失败文案


Shiny Finish

Different from PLA-CF's matte finish, PETG-CF offers a shiny finish and thus one more choice.

图片加载失败文案 图片加载失败文案


Strong XY Performance

The addition of carbon fiber also significantly enhances the XY strength of PETG without sacrificing layer bonding.


High Flexibility

Compared to other carbon fiber materials, Bambu PETG-CF exhibits exceptional toughness

and is less prone to fracture under external stress and impact.

图片加载失败文案 图片加载失败文案


RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

rfid rfid

Parameters Comparison

Price $34.99 $34.99
Filament Type Carbon Fiber Infill Carbon Fiber Infill
Hotend Compatibility Hardened Steel (0.4, 0.6, 0.8 mm) Hardened Steel (0.4, 0.6, 0.8 mm)
Build Plate Compatibility Engineering Plate, High Tenperature Plate, Textuerd PEI Plate Cool Plate, High Tenperature Plate, Textuerd PEI Plate
AMS Compatibility Yes Yes
Surface Shiny Matte
Print Speed <200 mm/s <250 mm/s
Toughness (Impact Strength - XY) 41.2 kJ/m² 23.2 kJ/m²
Strength (Bending Strength - XY) 83 MPa 96 MPa
Stiffness (Bending Modulus - XY) 2890 MPa 3700 MPa
Layer Adhesion (Impact Strength - Z) 10.7 kJ/m² 7.8 kJ/m²
Heat Resistant(HDT, 0.45 MPa) 74 °C 55 °C


Recommended Printing Settings
Drying Settings before Printing 65 °C,8 h
Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Nozzle Temperature 240 - 270 °C
Bed Temperature (with PVP Glue) 65 - 75 °C
Printing Speed < 200 mm/s
Physical Properties
Density 1.25 g/cm³
Vicat Softening Temperature 85 °C
Heat Deflection Temperature 74 °C
Melting Temperature 225 °C
Melt Index 19.3 ± 2.4 g/10 min
Mechanical Properties
Tensile Strength 59 ± 4 MPa
Breaking Elongation Rate 10.4 ± 0.6 %
Bending Modulus 2890 ± 130 MPa
Bending Strength 83 ± 4 MPa
Impact Strength 41.2 ± 2.6 kJ/m²

Printing Tips

• Bambu PETG-CF needs proper drying before printing. Recommended drying condition is 65 ℃ for 8 hours in a filament dryer, and 75 ℃ for 10 hours on a printer‘s heatbed. Learn more about filament drying. Please refer to: Filament drying cover on WIKI.

• To get stronger Z-adhesion, please set a higher infill density, and do not use an open-frame printer or set too large fan percentages to avoid over cooling.

• To get shinier looks, set lower speeds and relatively higher temperatures.

What's in the Box

图片加载失败文案 图片加载失败文案

Filament with Spool*1 & Desiccant*1

图片加载失败文案 图片加载失败文案

Filament Label*1

图片加载失败文案 图片加载失败文案