Support for PA/PET

Breakaway Support (formerly 'Support G')

€43,72 EUR

Final price and VAT may change based on shipping destination at checkout.

Product Features
  • Easy removal by hand
  • Perfect support interface
  • Recommended for PAHT-CF, PA6-CF, PET-CF, PA-GF, etc.
  • Comes with High Temperature Reusable Spool
  • Diameter: 1.75mm +/- 0.03mm

Cautions for Use
  • ONLY used for support interface
  • Not used for printing models alone
  • Dry out before use
  • Remove support structure promptly
  • AMS compatible
Type:
Size:
Color: Green (65500)
Quantity:
€43,72 EUR

Order Info
  • Order will be shipped out from DE warehouse in 1-3 business days once being processed.
  • Free Shipping over €55 (most EU countries)
  • Free Shipping over €119 (Norway, Cyprus, Malta, Switzerland)
  • Shipping rates vary by locations. See our Shipping Policy for details.
图片加载失败文案 图片加载失败文案


RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

图片加载失败文案 图片加载失败文案


Recommended Printing Settings
Drying Settings (Blast Drying Oven) 80 °C,12h
Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Nozzle Temperature 280 - 300 °C
Bed Temperature (with Glue) 80 - 110 °C
Printing Speed < 100 mm/s
Physical Properties
Density 1.17 g/cm³
Vicat Softening Temperature N / A
Heat Deflection Temperature N / A
Melting Temperature 255 °C
Melt Index 29.2 ± 2.1 g/10 min
Mechanical Properties
Tensile Strength N / A
Breaking Elongation Rate N / A
Bending Modulus N / A
Bending Strength N / A
Impact Strength N / A



Printing Tips

• Support for PA/PET needs proper drying before printing: recommended drying temperature is 80 ℃ for 8 hours in a blast drying oven, or 90 ℃ for 10 hours on heat bed. Learn more about filament drying. Please refer to Filament drying cover on WIKI.

• We recommend removing the support structures within 2 hours after printing to prevent them from sticking after absorbing moisture. If sticking occurs, dry the model to ease the removal.


What's in the Box

图片加载失败文案 图片加载失败文案

Filament with Spool*1 & Desiccant*1

图片加载失败文案 图片加载失败文案

Package*1



Parameters Comparison

Learn more different filaments comparison on Bambu Filament Guide >>

Support for PLA/PETG Support for PLA Support for ABS Support for PA/PET PVA
Color Nature White & Black White Green Clear
Nozzle Type All Size / Material All Size / Material 0.4 / 0.6 / 0.8 mm 0.4 / 0.6 / 0.8 mm Hardened Steel All Size / Material
Nozzle Temperature 190 - 220 °C 220 - 230 °C 240 - 270 °C 280 - 300 °C 220 - 250 °C
Bed Temperature 35 - 60 °C 35 - 45 °C 80 - 100 °C 80 - 100 °C 35 - 45 °C
Printing Speed < 100 mm/s < 200 mm/s < 100 mm/s < 100 mm/s < 200 mm/s
Solubility Water-insoluble Water-insoluble Water-insoluble, limonene-dissolvable Water-insoluble Water-dissolvable
Dry before Use Optional Optional Optional Required Required
Dry Protection during Use Optional Optional Optional Required Required
Filament Compatibility PLA, PETG PLA ABS PAHT-CF,PA6-CF,PA6-GF, PET-CF PLA, PETG


1. Support filament cannot be used to print an item alone, but only to print the supporting portion of that item. AMS is recommended for multi-material printing with Bambu Support filament.
2. Bambu Support filament can only be used with compatible temperatures and filament types. Failure to follow these guidelines can lead to clogs or other issues.