Bambu PETG HF

PETG HF is a fully optimized PETG filament designed specifically for high-speed printing. With a default printing speed that is twice as fast as standard PETG filaments, PETG HF takes your printing efficiency to new heights.

It effectively addresses common issues such as oozing and clumping associated with regular PETG, ensuring smoother and more reliable prints. The new matte finish not only enhances the aesthetic by smoothing out uneven gloss during speed transitions but also provides a consistently uniform look.

Offering greater durability and toughness than PLA, PETG HF is the ideal choice for creating long-lasting items with an improved finish and faster production times.

* Thank Adrian Luben (Social Handle: @Marsgizmo) for creating this video.

Designed for Speed

Twice as fast as standard PETG*, PETG HF significantly boosts your productivity without compromising the quality of your prints.

* The speed of PETG HF can be twice as fast compared to regular PETG, but achieving this speed is highly dependant on model size and geometry.

Print Flawlessly with Minimal Tuning

PETG HF excels in printability among PETG filaments with its higher adaptability for printers and printing settings, achieving ideal print results without fine-tuning parameters. Thanks to advanced formula optimization, PETG HF bids farewell to oozing and clumping, ensuring smoother prints with crisp details.

Smooth, Soft Texture

PETG HF provides a smooth texture and consistent gloss at any printing speed, ensuring uniformity and sharp details in every print.

Ready for Outdoor Use

PETG HF maintains the inherent strengths of regular PETG, providing superior resistance to water, UV, and temperatures. Tougher and more durable than PLA, with higher temperature resistance, it's the perfect choice for printing outdoor items such as planter pots, bird cages, watering cans, and automotive parts. Additionally, it's ideal for outdoor toys that require long-term exposure and the ability to withstand impacts, collisions, and falls.

Accessory Compatibility

	Recommended	Not Recommended
Build Plate	Smooth PEI Plate,Textured PEI Plate	Cool Plate
Hotend	All Size / Material	/
Glue	Bambu Liquid Glue Glue Stick	/

PETG HF Hex Code Table

Color	Hex Code	Display
Yellow	#FFD00B
Orange	#F75403
Green	#00AE42
Red	#EB3A3A
Blue	#002E96
Black	#000000
White	#FFFFFF
Cream	#F9DFB9
Lime Green	#6EE53C
Forest Green	#39541A
Lake Blue	#1F79E5
Peanut Brown	#875718
Gray	#ADB1B2
Dark Gray	#515151

Parameters Comparison

Learn more different filaments comparison on Bambu Filament Guide >>

	PLA Basic	PETG HF	PETG Basic
Printing Speed*	~ 300 mm/s	~ 300 mm/s	~ 200 mm/s
Preset Printing Speed*	258 mm/s	258 mm/s	172 mm/s
Strength (Bending Strength - XY)	76 MPa	64 MPa	65 MPa
Stiffness (Bending Modulus - XY)	2750 MPa	2050 MPa	1670 MPa
Layer Strength (Bending Strength - Z)	59 MPa	48 MPa	48 MPa
Layer Adhesion (Impact Strength - Z)	13.8 kJ/m²	10.6 kJ/m²	13.6 kJ/m²
Toughness (Impact Strength - XY)	26.6 kJ/m²	31.5 kJ/m²	52.7 kJ/m²
Heat Resistance (HDT, 0.45 MPa)	57 °C	69 °C	69 °C

1. Maximum Printing Speed* refers to the highest speed achievable by the filament while maintaining high print quality, given an appropriate increase in nozzle temperature.

2. Preset Maximum Printing Speed* refers to the highest speed achievable with default settings, ensuring top printing quality in most environments.

Settings: Bambu Lab X1-Carbon, 0.4 mm nozzle, 0.2 mm layer height

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Recommended Printing Settings
Drying Settings (Blast Drying Oven)	65 °C, 8 h
Printing and Keeping Container's Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	230 - 260 °C
Bed Temperature (with Glue)	65 - 75 °C
Printing Speed	< 300 mm/s

Physical Properties
Density	1.28 g/cm³
Vicat Softening Temperature	70 °C
Heat Deflection Temperature	69 °C
Melting Temperature	214 °C
Melt Index	28.2 ± 2.7 g/10 min

Mechanical Properties
Tensile Strength	34 ± 4 MPa
Breaking Elongation Rate	8.6 ± 1.2 %
Bending Modulus	2050 ± 120 MPa
Bending Strength	64 ± 3 MPa
Impact Strength	31.5 ± 2.2 kJ/m²

Downloads

Filament TDS

Filament MSDS

Filament RoHS

Printing Tips

Dry out before use for higher printing quality. PETG HF must be dried before use and remain moisture-free during the printing process, especially for longer print times (over 6 hours).

Drying conditions: 65℃ for 8 h in the Blast Drying Oven; 75 - 85℃ for 12 h in the X1 Series Heatbed. For more details please refer to: Filament Drying Recommendations on WIKI. Please note that the spool can withstand the higher temperature for drying on the heatbed.

What's in the Box?

Filament with Spool*1 & Desiccant*1

Package*1

NEW

PETG HF