
Informazioni sull'ordine
- L'ordine verrà spedito dal magazzino DE entro 1-3 giorni lavorativi una volta elaborato.
- Spedizione gratuita per importi superiori a € 55 (la maggior parte dei paesi dell'UE)
- Spedizione gratuita per importi superiori a € 119 (Norvegia, Cipro, Malta, Svizzera)
- Le tariffe di spedizione variano in base alla località. Consulta il nostro Politica di spedizione per i dettagli.






Instruction


Tunable White COB LED Strip Light
Illuminate Your Printing Journey


Product Specification | |
Type of Strip | COB (chip on board) |
IC type | 16703 |
LED Model | 2835 |
Led Quantity | 2160 LEDs (432 LEDs/M) |
Length | 16.4ft/5m |
Product Specification | |
Input Voltage Power |
DC24V 16.3W/m |
LED Strip Width | 12 mm |
Color | Dual temperature |
Color Temperature | 2700K-6500K |
FPCB Color | White |
Product Specification | |
Operating Temperature | -4℉~104℉(-20℃~+40℃) |
Control Distance | 20-30M |
Battery Type | CR2025 |
Cutting Unit | 16.7 cm |
Waterproof | IP 20 |
Installation
Light Touch Panel Controller Instructions
In the Box
Item Number | Item Name | Quantity |
1 | White CCT Tunable COB LED Strip Light | 1 |
2 | 24V 2A AC to DC Power Adapter | 1 |
3 | DC5521 Female to 2PIN Solderless Quick Connector | 1 |
Consideration
Power Safety
1. Always disconnect the power supply before starting any installation to prevent electric shock or short circuits.
2. Ensure you are using the correct voltage as specified on the product to avoid damage, overheating, or potential fire hazards.
Cutting & Bending
1. Cut only along the predefined cut marks to maintain electrical continuity and proper function. Cutting in the wrong place may lead to circuit failure.
2. Avoid bending or twisting the lamp strip over very short distances, as this can damage internal wiring and compromise durability.
3. If bending is required, do so gradually and within the recommended bending radius to prevent breakage.
Soldering & Heat Protection
1. Use a soldering iron with appropriate temperature control when attaching wiring heads to avoid overheating components.
2. Keep the luminescent colloid (LEDs and surrounding encapsulation) away from excessive heat, as high temperatures can cause burns, discoloration, or reduced lifespan.
Operational Integrity
1. Follow the manufacturer’s guidelines for installation and usage to ensure the strip functions correctly and lasts as intended.
2. Improper handling, excessive bending, or exposure to incompatible environmental conditions may compromise the product’s performance and safety.