.jpg)
Hotend Bambu ad alto flusso - H2/P2S
Il prezzo finale e l'IVA possono variare in base alla destinazione di spedizione al momento del checkout.
- L'ordine sarà spedito dal magazzino DE entro 1-3 giorni lavorativi una volta elaborato.
- Spedizione gratuita sopra i 55 euro (la maggior parte dei paesi dell'UE).
- Spedizione gratuita per importi superiori a 119 euro (Norvegia, Cipro, Malta, Svizzera).
- Le tariffe di spedizione variano a seconda delle località. Consulta la nostra politica di spedizione. for details.
Real High Flow: Save Up to 30% of Your Time
The Bambu High Flow Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5%1 higher max volumetric speed and reducing print time by up to 30%2 with ease. The larger your model, the more time you save—especially for prints with extensive infills.
1. Tested with ABS, Ø240mm single-wall cylinder, 0.2mm layer height, 1.0mm outer wall, 280℃ nozzle temperature, spiral vase mode on.
2. Tested with PLA Basic, 15% infill, 300x300x300mm cube.
| PLA Base | PLA Matte | PETG HF | |
| Bambu Hardened Steel Nozzle (0.4mm) | 24mm³/s |
28mm³/s
|
24mm³/s
|
| Bambu High Flow Nozzle (0.4mm) | 40mm³/s | 48mm³/s | 32mm³/s |
| Bambu High Flow Nozzle (0.6mm) | 40mm³/s | 40 mm³/s | 40 mm³/s |
| Bambu High Flow Nozzle (0.8mm) | 40 mm³/s | 40 mm³/s | 40 mm³/s |
High-Speed Precision: Sharp Details Every Time
Say goodbye to under-extrusion, rough surfaces, and loss of detail. Unlike standard high-flow nozzles, Bambu's high yet consistent extrusion ensures crisp edges, flawless texturing, and ultra-smooth surfaces—every single time.
Upgrade now and print faster without compromise!
Printer Compatability
| Serie H2 | Serie X1/P1 | Serie A1 |
| Supportato | Non supportato |
Supported*
|
*Bambu High Flow Nozzle is compatible with A1 Series, but it will not improve volumetric speed. In other words, the High Flow Nozzle performs the same as a standard nozzle on the A1 Series.
Filament Compatibility
| Filamento | Flusso elevato da 0,4 mm Acciaio temprato |
Flusso elevato da 0,6 mm Acciaio temprato |
Flusso elevato da 0,8 mm Acciaio temprato |
| PLA Base | √ | √ | √ |
| PLA Matte | √ | √ | √ |
| Gradiente base PLA | √ | √ | √ |
| PLA Seta+ | √ | √ | √ |
| PLA Seta Doppio Colore | √ | √ | √ |
| Seta PLA | √ | √ | √ |
| Metallo PLA | √ | √ | √ |
| Marmo PLA | √ | √ | √ |
| PLA scintillante | √ | √ | √ |
| PLA Wood | √ | √ | √ |
| Galassia PLA | √ | √ | √ |
| Bagliore PLA | √ | √ | √ |
| PLA-CF | Non raccomandato | √ | √ |
| PLA Aero | √ | √ | √ |
| PETG HF | √ | √ | √ |
| PETG Translucent | √ | √ | √ |
| PETG-CF | Non raccomandato | √ | √ |
| ABS | √ | √ | √ |
| ABS-GF | √ | √ | √ |
| Lavoro | √ | √ | √ |
| ASA Aero | √ | √ | √ |
| Quindi-cfr | Non raccomandato | √ | √ |
| computer | √ | √ | √ |
| PC FR | √ | √ | √ |
| TPU per AMS | √ | √ | √ |
| TPU 95AHF | √ | √ | √ |
| TPU85A | X | X | X |
| TPU90A | X | X | X |
| PAHT-CF | Non raccomandato | √ | √ |
| PET-CF | √(Only for Left Hotend) | √(Only for Left Hotend) | √(Only for Left Hotend) |
| PA6-CF | Non raccomandato | √ | √ |
| PPA-CF | √(Only for Left Hotend) | √(Only for Left Hotend) | √(Only for Left Hotend) |
| PPS-CF | √(Only for Left Hotend) | √(Only for Left Hotend) | √(Only for Left Hotend) |
| Supporto per l'ABS | √ | √ | √ |
| Supporto per PLA/PETG | √ | √ | √ |
| Support for PA/PET | √ | √ | √ |
| Support for PLA (New Version) | √ | √ | √ |
| PVA | √ | √ | √ |
| PA6-GF | Non raccomandato | √ | √ |
Quick Swap Nozzle Design
*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.
*Learn more about replacing the Hotend on Bambu Lab Wiki
In the Box
| High Flow Hotend |
| High Flow Hotend with hardened steel nozzle - 0.4 mm * 1 |
Specifiche del prodotto
| Max. Printing Temp. | 350 ℃ | Lunghezza | 49.2 mm |
| Packaging Weight | 0.028 kg | Packaging Size | 60*60*30mm |