Bambu Build Plates

€34,39 EUR €42,99 EUR

El precio final y el IVA pueden cambiar según el destino del envío al finalizar la compra.

Save 
Code: 
Copy
Type:
Compatibility:
Cantidad:
€34,39 EUR €42,99 EUR

Información del pedido
  • El pedido se enviará desde el almacén DE en 1 a 3 días hábiles una vez procesado.
  • Envío gratuito a partir de 55 € (la mayoría de los países de la UE)
  • Envío gratuito a partir de 119 € (Noruega, Chipre, Malta, Suiza)
  • Las tarifas de envío varían según las ubicaciones. Consulte nuestro objetivo Política de envío para más detalles.
Bambu Textured PEI Plate, Excellent first-layer adhesion, Improved durability Bambu Textured PEI Plate, Excellent first-layer adhesion, Improved durability

Excellent First-layer Adhesion and Improved Durability

After optimizing the manufacturing process of the Bambu Texture PEI Plate, the durability of the plate is enhanced. Additionally, the adhesion between the prints and the plate is significantly improved, eliminating the need for adhesives.

*In some situations, glue is required for very specific filaments


Surface Finish Surface Finish

Self-release when Cooled Down

PEI is an excellent material for 3D printing applications due to its ability to withstand the repeated heating and cooling cycles of a printer heatbed. Prints come off easily when the temperature of the heatbed reaches room temperature, and we always recommend waiting until it reaches 35℃ or lower. If the print is still adheres to the plate, simply bend the steel plate and the model will fall right into your hands.



Bambu Smooth PEI Plate, High Z-axis precision printing, Smooth and matte surface finish Bambu Smooth PEI Plate, High Z-axis precision printing, Smooth and matte surface finish


 



High Z-axis Precision Printing

The use of a Smooth PEI Plate contributes to improved Z-axis precision during the printing process, ensuring greater accuracy and consistency in the vertical dimension. These qualities make the Smooth PEI Plate an excellent choice for printing parts that demand a high level of fit accuracy, where precise alignment and tight tolerances are crucial.




Surface Finish Surface Finish

Smooth and Matte Surface Finish

The use of a specially selected matte PEI sheet can impart a smooth and matte texture to the bottom surface of the printed object, enhancing its overall appearance.



Bambu Textured PEI Plate, Excellent first-layer adhesion, Improved durability Bambu Textured PEI Plate, Excellent first-layer adhesion, Improved durability

Two Textures (Textured and Smooth) in One Plate


Enjoy the benefits of two different textures in one plate, one side is Textured PEI surface and the other side is Smooth PEI surface. This Plate features a 0.5mm magnetic stainless steel plate that enhances magnetic adhesion and helps to prevent warping and ensure optimal print quality during 3D printing.


  

Considerations

  • Deposition of dust and grease on the build plate decrease adhesion. It is recommended to regularly clean the surface with detergent and water to to maintain best adhesion.
  • Increasing heatbed temperature enhances adhesion. Users need to adjust the temperature of the heatbed based on their specific requirements in order to achieve the most suitable level of adhesion.
  • Carefully sanding the Textured PEI surface with fine-grit (600 was recommended) sandpaper can help restore adhesion.
  • If bubbles appear on the bottom of the Smooth PEI sheet, heating it on the heatbed at a temperature of no less than 80 degrees for several hours can be helpful in eliminating the bubbles.
  • Do not clean the Bambu Dual-Texture PEI Plate with Acetone, as it will damage the PEI surface.
  • Bambu Lab recommends only using Bambu Lab official glue on the Bambu Lab build plates, and can not be held responsible for any damage caused to plates as a result of using third-party glue on build plates. 
  • Always wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.
  • The Bambu Dual-Texture PEI Plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.

 


Recommended Settings

Please note that other slicer settings might need to be adjusted based on the printed model and the filament requirements

Materials Heatbed Temperature Glue Stick Required for  Smooth PEI Surface? Glue Stick Required for Textured PEI Surface?
PLA/PLA-CF/PLA-GF 45~65℃ No No
PETG/PETG-CF 60~80℃ Glue Stick/Liquid Glue No
ABS (not for A1 mini) 90~100℃ Glue Stick/Liquid Glue No
ASA (not for A1 mini) 90~100℃ Glue Stick/Liquid Glue No
TPU 35~45℃ Glue Stick/Liquid Glue Glue Stick/Liquid Glue
PVA 45~60℃ Glue Stick/Liquid Glue No
PC/PC-CF (not for A1 mini) 90~110℃ Glue Stick Glue Stick
PA/PA-CF/PAHT-CF (not for A1 mini) 90~110℃ Glue Stick Glue Stick
PET-CF (not for A1 mini) 80~100℃ Glue Stick/Liquid Glue No


Installation Steps for X1 Series/P1 Series/A1

Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you

Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you

Step 2: Lower the plate and secure to the magnetic platform Step 2: Lower the plate and secure to the magnetic platform

Step 2: Lower the plate and secure to the magnetic platform

Installation Steps for A1 mini

Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you

Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you

Step 2: Lower the plate and secure to the magnetic platform Step 2: Lower the plate and secure to the magnetic platform

Step 2: Lower the plate and secure to the magnetic platform