Support for PA/PET
El precio final y el IVA pueden variar según el destino de envío al finalizar la compra.
Product Features
- Easy removal by hand
- Perfect support interface
- Recommended for PAHT-CF, PA6-CF, PET-CF, PA-GF, etc.
- Comes with High Temperature Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- ONLY used for support interface
- Not used for printing models alone
- Dry out before use
- Remove support structure promptly
- Enclosure Printers Required
- AMS compatible
- AMS lite NOT Compatible
- El pedido se enviará desde el almacén de DE en 1-3 días laborables una vez procesado.
- Envío gratuito a partir de 55 € (la mayoría de los países de la UE)
- Envío gratuito a partir de 119 euros (Noruega, Chipre, Malta, Suiza)
- Las tarifas de envío varían según la ubicación. Consulte nuestra Política de envíos para más detalles.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
| Recommended Printing Settings | |
| Drying Settings (Blast Drying Oven) | 80 °C，12h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 280 - 300 °C |
| Bed Temperature (with Glue) | 80 - 110 °C |
| Printing Speed | < 100 mm/s |
| Physical Properties | |
| Density | 1.17 g/cm³ |
| Vicat Softening Temperature | N / A |
| Heat Deflection Temperature | N / A |
| Melting Temperature | 255 °C |
| Melt Index | 29.2 ± 2.1 g/10 min |
| Mechanical Properties | |
| Tensile Strength | N / A |
| Breaking Elongation Rate | N / A |
| Bending Modulus | N / A |
| Bending Strength | N / A |
| Impact Strength | N / A |
Printing Tips
• Support for PA/PET needs proper drying before printing: recommended drying temperature is 80 ℃ for 8 hours in a blast drying oven, or 90 ℃ for 10 hours on heat bed. Learn more about filament drying. Please refer to Filament drying cover on WIKI.
• We recommend removing the support structures within 2 hours after printing to prevent them from sticking after absorbing moisture. If sticking occurs, dry the model to ease the removal.
What's in the Box
Filament with Spool*1 & Desiccant*1
Package*1
Parameters Comparison
Learn more different filaments comparison on Bambu Filament Guide >>
| Support for PLA/PETG | Support for PLA | Support for ABS | Support for PA/PET | PVA | |
| Color | Nature | White & Black | White | Green | Clear |
| Nozzle Type | All Size / Material | All Size / Material | Hotend with Hardened Steel Nozzle 0.4 mm / 0.6 mm / 0.8 mm Hotend with Stainless Steel Nozzle 0.4 mm |
Hotend with Hardened Steel 0.4mm / 0.6mm (recommended) / 0.8 mm | All Size / Material |
| Nozzle Temperature | 190 - 220 °C | 220 - 230 °C | 240 - 270 °C | 280 - 300 °C | 220 - 250 °C |
| Bed Temperature | 35 - 60 °C | 35 - 45 °C | 80 - 100 °C | 80 - 100 °C | 35 - 45 °C |
| Printing Speed | < 100 mm/s | < 200 mm/s | < 100 mm/s | < 100 mm/s | < 200 mm/s |
| Solubility | Water-insoluble | Water-insoluble | Water-insoluble, limonene-dissolvable | Water-insoluble | Water-dissolvable |
| Dry before Use | Optional | Optional | Optional | Required | Required |
| Dry Protection during Use | Optional | Optional | Optional | Required | Required |
| Filament Compatibility | PLA, PETG | PLA | ABS | PAHT-CF,PA6-CF,PA6-GF, PET-CF | PLA, PETG |