PLA Glow

€23,52 EUR

Final price and VAT may change based on shipping destination at checkout.

Buy 4 Rolls Save 10%
Buy 8 Rolls Save 15%

Product Features
  • Unique Glow in Low Light Conditions
  • Includes Basic Reusable Spool
  • Diameter: 1.75mm +/- 0.03mm

Cautions for Use
  • AMS Compatible, but can lead to faster wear on internal components
  • AMS lite Not Compatible
  • 0.2 mm Nozzle Not Compatible

Note: A hardened nozzle is required when printing regularly.

Type:
Size:
Color: Glow Green (15500)
Quantity:
€23,52 EUR
Discover More Here!
The optimal nozzle for printing PLA Glow!

Order Info
  • Order will be shipped out from DE warehouse in 1-3 business days once being processed.
  • Free Shipping over €55 (most EU countries)
  • Free Shipping over €119 (Norway, Cyprus, Malta, Switzerland)
  • Shipping rates vary by locations. See our Shipping Policy for details.


Bambu PLA Glow

PLA Glow stands out due to its incorporation of a unique additive: luminous powder. This variant retains the familiar qualities of traditional PLA, including easy printing, high quality, and exceptional overall mechanical properties. What sets PLA Glow apart is its distinctive feature - it glows in the dark. This makes it the optimal selection for crafting luminous nameplates, logos, jewelry, and various models that require a captivating glow effect.

pla glow filament pa6-cf filament

Unique Glow in Low Light Conditions

Bambu PLA Glow incorporates a distinct additive: luminous powder, which imparts a special property to printed objects, causing them to emit a captivating glow in the dark.

tpu hf filament asa filament
tpu hf filament asa filament
tpu hf filament asa filament
tpu hf filament asa filament
tpu hf filament asa filament
tpu hf filament asa filament


Accessory Compatibility

Recommended Not Recommended
Build Plate Cool Plate, High Temperature Plate or Textured PEI Plate Engineering Plate
Hotend 0.4, 0.6, 0.8 mm Hardened Steel Nozzle* 0.2 mm Nozzle
Glue Bambu Liquid Glue
Glue Stick
/
AMS & AMS lite AMS AMS lite*

* A hardened nozzle is required when printing regularly.

* It is not recommended to print Bambu PLA Glow and other glow-in-the-dark PLA filaments with AMS Lite. These filaments, being hard and rough, may cause feeding failures due to substantial feeding resistance.


PLA Glow Hex Code Table

Color Hex Code Display
Glow Green #A1FFAC
Glow Yellow #F8FF80
Glow Pink #F17B8F
Glow Blue #7AC0E9
Glow Orange #FF9D5B

* The hex code indicates the daytime color of PLA Glow.


RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

rfid rfid


Recommended Printing Settings
Drying Settings (Blast Drying Oven) 55 °C,8 h
Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Nozzle Temperature 190 - 230 °C
Bed Temperature (with Glue) 35 - 45 °C
Printing Speed < 250 mm/s
Physical Properties
Density 1.26 g/cm³
Vicat Softening Temperature 56 °C
Heat Deflection Temperature 55 °C
Melting Temperature 155 °C
Melt Index 23.3± 2.4 g/10 min
Mechanical Properties
Tensile Strength 32 ± 3 MPa
Breaking Elongation Rate 8.6 ± 1.2 %
Bending Modulus 2640 ± 130 MPa
Bending Strength 76 ± 4 MPa
Impact Strength 27.3 ± 2.2 kJ/m²



Printing Tips

• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.

• Printing with a 0.2 mm nozzle is not recommended; instead, it is advised to use a 0.4 mm nozzle for optimal results.

• The model's luminous intensity diminishes over time, but exposure to ultraviolet or sunlight for a brief period (approximately 2 hours) can rejuvenate its glow. However, prolonged or frequent irradiation may expedite PLA aging.

• Not suitable for AMS lite: Utilizing AMS lite may result in high feed resistance and an increased risk of feed failure. Consider alternative methods such as pre-use drying for better outcomes.


What's in the Box

Filament with Spool*1 & Desiccant*1

图片加载失败文案 图片加载失败文案

Package*1