Order Info
- Order will be shipped out from DE warehouse in 1-3 business days once being processed.
- Free Shipping over €55 (most EU countries)
- Free Shipping over €119 (Norway, Cyprus, Malta, Switzerland)
- Shipping rates vary by locations. See our Shipping Policy for details.
Real High Flow: Save Up to 30% of Your Time
The Bambu High Flow Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5%1 higher max volumetric speed and reducing print time by up to 30%2 with ease. The larger your model, the more time you save—especially for prints with extensive infills.
1. Tested with ABS, Ø240mm single-wall cylinder, 0.2mm layer height, 1.0mm outer wall, 280℃ nozzle temperature, spiral vase mode on.
2. Tested with PLA Basic, 15% infill, 300x300x300mm cube.
| PLA Basic | PLA Matte | PETG HF | Max Volumetric Speed | |
| Bambu Hardened Steel Nozzle (0.4mm) | 24 mm³/s |
28 mm³/s
|
24 mm³/s
|
40 mm³/s
|
| Bambu High Flow Nozzle (0.4mm) | 40 mm³/s | 48 mm³/s | 32 mm³/s | 65 mm³/s |
High-Speed Precision: Sharp Details Every Time
Say goodbye to under-extrusion, rough surfaces, and loss of detail. Unlike standard high-flow nozzles, Bambu's high yet consistent extrusion ensures crisp edges, flawless texturing, and ultra-smooth surfaces—every single time.
Upgrade now and print faster without compromise!
Printer Compatability
| H2D | X1/P1 Series | A1 Series |
| Supported | Not Supported |
Supported*
|
*Bambu High Flow Nozzle is compatible with A1 Series, but it will not improve volumetric speed. In other words, the High Flow Nozzle performs the same as a standard nozzle on the A1 Series.
Filament Compatibility
| Filament | 0.2 mm Stainless Steel |
0.4 mm Hardened Steel |
0.6 mm Hardened Steel |
0.8 mm Hardened Steel |
0.4 mm High Flow
Hardened Steel |
| PLA Basic | √ | √ | √ | √ | √ |
| PLA Matte | √ | √ | √ | √ | √ |
| PLA Basic Gradient | √ | √ | √ | √ | √ |
| PLA Silk+ | √ | √ | √(Not recommended) | √(Not recommended) | √ |
| PLA Silk Dual Color | √ | √ | √(Not recommended) | √(Not recommended) | √ |
| PLA Silk | √ | √ | √(Not recommended) | √(Not recommended) | √ |
| PLA Metal | √ | √ | √ | √ | √ |
| PLA Marble | √(Not recommended) | √ | √ | √ | √ |
| PLA Sparkle | √(Not recommended) | √ | √ | √ | √ |
| PLA Wood | √(Not recommended) | √ | √ | √ | √ |
| PLA Galaxy | √(Not recommended) | √ | √ | √ | √ |
| PLA Glow | X | √ | √ | √ | √ |
| PLA-CF | X | √ | √ | √ | √ |
| PLA Aero | X | √ | √(Not recommended) | √(Not recommended) | √ |
| PETG HF | √ | √ | √ | √ | √ |
| PETG Translucent | √(Not recommended) | √ | √ | √ | √ |
| PETG-CF | X | √ | √ | √ | √ |
| ABS | √ | √ | √ | √ | √ |
| ABS-GF | X | √ | √ | √ | √ |
| ASA | √ | √ | √ | √ | √ |
| ASA Aero | X | √ | √(Not recommended) | √(Not recommended) | √ |
| ASA-CF | X | √ | √ | √ | √ |
| PC | √ | √ | √ | √ | √ |
| PC FR | √ | √ | √ | √ | √ |
| TPU for AMS | X | √ | √ | √ | √ |
| TPU 95A HF | X | √ | √ | √ | √ |
| TPU 85A | X | X | √ | √ | X |
| TPU 90A | X | √ | √ | √ | X |
| PAHT-CF | X | √ | √ | √ | √ |
| PET-CF | X | √ | √ | √ | √(Only for Left Hotend) |
| PA6-CF | X | √ | √ | √ | √ |
| PPA-CF | X | √ | √ | √ | √(Only for Left Hotend) |
| PPS-CF | X | √ | √ | √ | √(Only for Left Hotend) |
| Support for ABS | X | √ | √ | √ | √ |
| Support for PLA/PETG | √ | √ | √ | √ | √ |
| Support for PA/PET | X | √ | √ | √ | √ |
| Support for PLA (New Version) | √ | √ | √ | √ | √ |
| PVA | √ | √ | √ | √ | √ |
| PA6-GF | X | √ | √ | √ | √ |
[Note]
- Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
- For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
- Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.
Quick Swap Nozzle Design
*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.
*Learn more about replacing the Hotend on Bambu Lab Wiki
In the Box
| High Flow Hotend |
| High Flow Hotend with hardened steel nozzle - 0.4 mm * 1 |
Product Specifications
| Max. Printing Temp. | 350 ℃ | Length | 49.2 mm |
| Packaging Weight | 0.028 kg | Packaging Size | 60*60*30mm |