Bambu PLA Marble

Bambu PLA Marble mimics the appearance of natural stone.

With inorganic particles in its composition, it offers a vivid stone-like texture that resembles marble, granite, or bricks. It adds a touch of nature to your prints and provides a stunning finish for your projects.

Accessory Compatibility

	Recommended	Not Recommended
Build Plate	Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate	/
Hotend	Hotend with Hardened Steel Nozzle 0.4 mm / 0.6 mm / 0.8 mm Hotend with Stainless Steel Nozzle 0.4 mm	Hotend with Stainless Steel Nozzle 0.2 mm
Glue	Bambu Liquid Glue Glue Stick	/

PLA Marble Hex Code Table

Color	Hex Code	Display
White Marble	#F7F3F0
Red Granite	#AD4E38

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Recommended Printing Settings
Drying Settings (Blast Drying Oven)	55 °C, 8 h
Printing and Keeping Container's Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	190 - 230 °C
Bed Temperature (with Glue)	35 - 45 °C
Printing Speed	< 250 mm/s

Physical Properties
Density	1.22 g/cm³
Vicat Softening Temperature	57 °C
Heat Deflection Temperature	56 °C
Melting Temperature	156 °C
Melt Index	32.2 ± 4.5 g/10 min

Mechanical Properties
Tensile Strength	33 ± 4 MPa
Breaking Elongation Rate	6.7 ± 0.5 %
Bending Modulus	2920 ± 180 MPa
Bending Strength	75 ± 5 MPa
Impact Strength	24.0 ± 2.5 kJ/m²

Downloads

Filament TDS

Filament MSDS

Filament RoHS

Printing Tips

• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.

What's in the Box

Filament*1 & Desiccant*1

Package*1