PVA

Water-soluble support

€44,82 EUR

Final price and VAT may change based on shipping destination at checkout.

Save 
Code: 
Copy
Product Features
  • Easily dissolved in water
  • Smooth support interface
  • Recommended for all PLA & PETG
  • Comes with High Temperature Reusable Spool
  • Diameter: 1.75mm +/- 0.03mm

Cautions for Use
  • ONLY used for support
  • Not to be used for standalone models
  • Dry out before use
  • AMS & AMS lite Compatible

Note: Before printing, please kindly refer to the Printing Tips for optimal results.

Type:
Size:
Color: Clear (66400)
Quantity:
€44,82 EUR

Order Info
  • Order will be shipped out from DE warehouse in 1-3 business days once being processed.
  • Free Shipping over €55 (most EU countries)
  • Free Shipping over €119 (Norway, Cyprus, Malta, Switzerland)
  • Shipping rates vary by locations. See our Shipping Policy for details.


Bambu PVA

Bambu PVA is a water-dissolvable support material. It provides reliable support for complex designs and overhangs, which can be easily dissolved in water after printing. Compatible with various filaments, it simplifies post-processing and reduces the risk of damaging the printed object during support removal.

silk filament silk filament

Soak and Dissolve for Supporting Intricate Details

Bambu PVA possesses the ability to dissolve in water, penetrating deep into the intricacies to provide support where regular supports fall short. With Bambu PVA you can design and print models that were previously impossible.



Seamless Support Interface Surface

Water-soluble support material can accommodate zero top interface spacing, guaranteeing a seamless bond with the print surface, resulting in precise and smooth support contact surfaces for your prints.

silk filament silk filament
silk filament silk filament

Thorough and Clean Dissolution

Bambu PVA utilizes a high-quality formula that dissolves easily and thoroughly in water, effortlessly removing support material and eliminating the hassle of manual cleaning.

pva support pva support

Support Filament Comparision

PVA Support for PLA Support for PA/PET
Compatibility PLA, PETG, PLA-CF/GF, PETG-CF/GF PLA, PLA-CF/GF PA, PA-CF/GF, PA6-CF/GF
PAHT-CF/GF, PET-CF/GF
Nozzle Compatibility All Size / Material Hotend with Hardened Steel 0.4mm / 0.6mm (recommended) / 0.8 mm
Solubility Water-dissolvable Water-insoluble

Accessory Compatibility

Recommended Not Recommended
Build Plate Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate /
Hotend All Size / Material /
Glue Bambu Liquid Glue / Glue Stick /

PVA Hex Code Table

Color Hex Code Display
Clear #F0F1A8

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

rfid rfid
Recommended Printing Settings
Drying Settings (Blast Drying Oven) 80 °C, 12 h
Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Nozzle Temperature 220 - 250 °C
Bed Temperature (with Glue) 35 - 45 °C
Printing Speed < 200 mm/s
Physical Properties
Density 1.27 g/cm³
Vicat Softening Temperature N / A
Heat Deflection Temperature N / A
Melting Temperature 202 °C
Melt Index 7.2 ± 1.1 g/10 min
Mechanical Properties
Tensile Strength N / A
Breaking Elongation Rate N / A
Bending Modulus N / A
Bending Strength N / A
Impact Strength N / A

Printing Tips

• Drying conditions: 80 °C for 12 hrs. To achieve optimal printing performance, it is recommended further drying before use and after storage. For more details please refer to: Filament drying instructions on WIKI.

• Please carefully read PVA Printing Guide before starting the printing process.

• PVA is suitable for use with AMS and AMS lite in a dry state. If the filament becomes soft or sticky due to moisture, it must be dried again before use to prevent issues such as feeding failure, nozzle clogging, and low print quality.

• PVA may darken in color after extended storage or multiple drying cycles, but it won't affect its printing performance or support capabilities.

• Recommend to use normal support instead of tree support. Tree support is more likely to collapse during printing.

• Use warm water to speed up the dissolving process. But if supporting PLA, the maximum water soaking temperature should not exceed 50°C to prevent deformation of the main model.

• Waiting for complete dissolution is not necessary when soaking and dissolving PVA support. You can manually remove the partially dissolved PVA support to reduce the waiting time.

• When dissolving supports in water, some parts of the main model may leak in water. To mitigate this risk, please refer to: Reduce the risk of prints leakage guide on WIKI.

• Depending on the use case, Bambu PVA can also be used solely for printing the support interface to minimize material waste and printing time.

pva support pva support

What's in the Box

Filament with Spool*1

图片加载失败文案 图片加载失败文案

Package*1