Order Info
- Free Shipping over €55 (most EU countries)
- Free Shipping over €119 (Norway, Cyprus, Malta, Switzerland)
- Shipping rates vary by locations. See our Shipping Policy for details.
Overview
The following models all require the use of a Self-Locking Button Switch. To complete the assembly of a full model, users need to download the model files and 3D print the remaining parts.| Models Using This Part |
Creators |
Model Links |
|
Endless Loop Express
|
IMD_Q. |
Endless Loop Express |
| Running Dinosaur Automaton |
Amao Chan | Running Dinosaur Automaton |
| Mini Motorized Basketball Game | Kit Crafters | Mini Motorized Basketball Game |
Instruction
Used with a Power Distribution Board (PDB) - 4 Channels, it controls the ON/OFF state of the corresponding channel, thereby achieving the function of switch control.
-
The Self-Locking Button Switch with SH1.0 Connector is a switch device that can be connected to SW0~4 on the Power Distribution Board (PDB) to control the switch of electric devices. Pressing the button down connects the circuit; pressing it again pops it up and disconnects the circuit.
-
When the Self-Locking Button Switch is connected to SW1~4, it's necessary to ensure that the maximum current of the electric devices in each corresponding channel does not exceed 1A.
-
When the Self-Locking Button Switch is connected to the SW0, it's necessary to ensure that the sum of the maximum currents of all electric devices does not exceed 1A.
-
Secured with two M2 screws.
Electronics System
The components of this circuit set can be divided into five categories: Power Distribution Board (PDB) - 4 Channels, power-type devices, power supply devices, switch devices, and wires. The Power Distribution Board has channels for connecting power supply devices, switch devices, and electric devices. Please refer to the figure below for the devices supported by each connector. The IN is used to connect various power supply devices, such as AA Battery Case and USB-A Power Cable; the CH1-4 are used to connect various electric devices, such as N20 Reduction Gear Motor (150rpm) and 4 White 3030-LED Board, and supports up to 4 connections; the SW0~4 is used to connect various switch devices, such as Self-locking Button Switch, Potentiometer Board, and Jumper Cable. Please do not connect electric devices to the SW0~4, and likewise, do not connect switches to the CH1~4. The OUT is used to connect to the next Power Distribution Board to achieve connector expansion. To learn more about case, please refer to the Application Instruction.
Product Specifications
|
Product ID
|
Connector Model
|
Maximum Current
(A) |
Size
(mm) |
Weight
(g) |
| IA006 | SH1.0-2P | 1A | 21x8x15 | 0.8 |
In the box
-
Self-Locking Button Switch with SH1.0 Connector x2pcs
-
Wire Pair with SH1.0 x2pcs
Consideration
-
Please do not forcefully twist the connectors to avoid wires loosening or detaching.