P1P Enclosure Kit
ā¬100,00 EURā¬293,85 EUR
Der Endpreis und die Mehrwertsteuer können sich beim Checkout je nach Versandziel ändern.
Menge:
Bestelldetails
- Die Bestellung wird innerhalb von 1-3 Werktagen nach der Bearbeitung aus dem DE-Lager verschickt.
- Kostenloser Versand ab 55 € (die meisten EU-Länder)
- Kostenloser Versand ab einem Bestellwert von 119 € (Norwegen, Zypern, Malta, Schweiz)
- Die Versandtarife variieren je nach Standort. Siehe unsere Versandbedingungen für weitere Details.
Sicherheits- und Produktressourcen
Sicherheitsbilder
Kontakte
Overview
The Bambu Lab P1P Enclosure KitĀ packs all the partsĀ needed toĀ encloseĀ the P1P 3D printer.Ā AfterĀ enclosing theĀ P1P, the printer definition will remain the same. It is not possible to change the printer definition from P1P to P1S after the enclosure.
The glass cover plate, front glass door, left/rightĀ plastic panels, rear metal panel, front coverĀ can enclose the P1P 3D printer.
The auxiliary part cooling fan, control board fan, and chamber temperature regulator fan can aid heat dissipation to achieve higher-speed printing.
The cable chain and P1S toolhead cable can ensure reliable performance during repetitive bending as a result of motion. The 550mm PTFE tubeĀ (for P1S and X1 Series) allows more ample movement of the filament and lowers the extra abrasion.
Ā
In the Box
1. Glass Cover Plate *1
2. Front Glass Door *1
3. Front Door Mounting Kit *1
4. Left Plastic Panel *1
5. Right Plastic Panel *1
6. Rear Metal Panel *1
7. Front Cover *1
8.Ā Auxiliary Part Cooling Fan *1
9. Control Board Fan *1
10. Chamber Temperature Regulator Fan *1
11. Cable Chain Assembly *1
12. P1S Toolhead Cable *1
13. PTFE Tube *1
14. Heatsink for MC Board*115. Activated Carbon Filter*1
Total Weight: 6.5 kg
Installation Guide
1. Please finish the installation of Cable Chain AssemblyĀ and P1S Toolhead Cable first by following the instructions onĀ Bambu Lab Wiki.
2. Please throughly read the instruction article on Bambu Lab Wiki for the Enclosure Kit installation.
3. Please note that the left and right side panels of the P1P may be incompatible with the base and require shaving off two tabs on the bottom of the side panels for successful installation.